
Show image 1 of 4 · Magnetic charge port cover
InterCar
EV charge port cover for snow, rain and sun while the car charges
A magnetic fabric hood that goes over the plug and the charge port after you plug in, with a drawstring that closes around the cable.
- J1772
- NACS (Tesla)
- CCS1
$28.99
- Estimated delivery in 7–14 business daysFree shipping on orders over $49.00
- 30-day returns
- Secure checkout by Stripe
At a glance
- Covers the plug and the port while the car charges outdoors
- Two magnetic strips hold it to a steel body panel
- Drawstring closes the bottom around the cable
- Silver reflective lining keeps sun off the plug
- Works with J1772, NACS and CCS plugs
Before you use it
What it does

Magnetic strips
Two magnetic strips in the cover hold it to the panel beside the port, so it stays put in wind. They work on steel only: check the panel next to your port with a fridge magnet before ordering.
IllustrationA drawstring around the cable
Pull the drawstring at the bottom to close the cover around the charging cable. Snow and wind-driven rain stay out, and the cover cannot blow up and off the plug.

A reflective lining
A silver lining inside the fabric reflects sunlight, so a plug left charging in an open lot on a hot day sits in the shade of the cover.
Overview
Snow packed around a plug, rain running down the cable and hot sun on the handle all reach the one connection that matters while a car charges outside. This cover goes over the whole area after you plug in: magnetic strips hold it to the body panel, and a drawstring gathers the bottom around the cable.
The outside is black fabric and the inside has a silver reflective lining. It is 16.5 inches tall and widens from 8.7 inches at the top to 17.7 inches at the bottom, which covers the port door and the handle of common plugs.
Compatibility
- J1772
- NACS (Tesla)
- CCS1
Works with any plug, on a car whose body panel beside the charge port is steel.
- The magnets do not hold on aluminum or plastic panels. Test with a fridge magnet on the panel beside your port first.
In the box
- Charge port cover
Specifications
| Height | 16.5 in (42 cm) |
|---|---|
| Width | 8.7 in at the top, 17.7 in at the bottom (22 cm, 45 cm) |
| Bottom opening | 11.8 in across (30 cm) |
| Material | Black fabric with a silver reflective lining |
| Attachment | Two magnetic strips and a drawstring |
| Works with | J1772, NACS and CCS1 plugs |
Goes well with this
Pieces that work alongside this one. Untick anything you already have.
Total for 4 items: $99.96
Shipping and returns
- We place your order with our supplier within 1–2 business days of payment.
- Delivery usually takes 6–12 business days after that, with tracking.
- Shipping is free on orders over $49 and $5.95 below that. US addresses only.
- Unused items in their original packaging can be returned within 30 days of delivery. Damaged, defective or wrong items are replaced or refunded at no cost to you.
Questions about this product
When do I put it on?
After you plug in. It covers the plug and the port for the length of the charge, and comes off before you unplug and drive.
Will it hold on my car?
It holds wherever a magnet sticks to the panel beside the charge port. That depends on the panel, not the brand of car: some EVs use aluminum or plastic there. Test with a fridge magnet before ordering.
Can I use it in snow?
Yes, that is what the drawstring is for. Brush snow off the panel first so the magnets sit against the paint, then close the drawstring around the cable.
How is it different from the clear rain cover?
The clear cover is a light sheet for rain that lets you see the charging light. This one is fabric with a drawstring and a reflective lining, which suits snow, wind and strong sun.
More in Covers & weather protection
Need a charger installed or repaired?
We connect you with vetted, licensed local electricians and EVSE technicians for Level 2 charger installation and repair.
Estimates only. The local operator confirms the final price before dispatch.

